Department of Applied Chemistry & Chemical Engineering

• Home
• About us
• Chairman
• academic staff
• degree offered
• research scope
• student information
• contact information

Optional Info

Any information can be placed in the sidebar to help your website visitors navigate your site.

To make a boxed heading like the one above, simply apply the H3 tag.

To make a box like this, assign the "sidebarlt" class.

You can do anything with a sidebar box. Insert images, ads or other web content.

Here's a text link.

To make a box like this, assign the "sidebardk" class.

You can do anything with a sidebar box. Insert images, ads or other web content.

Here's a text link.

Home>About Us>Chairman>Academic Staff>Dr. M. Rostom Ali

 

Contact Information

Professor Department of Applied Chemistry and Chemical Engineering Faculty of  Engineering, University of Rajshahi, Rajshahi-6205, Bangladesh Tel: +(880) 721-750041 Ext. 4106 (off)          +(880) 721-750354 (res)                                                +(880) 1727226745  (mobile) Fax: +(880) 721-750064 e-mail: dmrali@yahoo.com

Research Area & Research Interest

Research Areas: Electrodeposition, Extractive  Metallurgy, Corrosion

Research Interests: Electrodeposition of metal and alloy from aqueous and non-aqueous solution / molten salt. Corrosion behaviour of mild steel and coated mild steel in indoor and outdoor exposure and its protection by using inhibitor, paint and metal / alloy coating. Leaching and extraction of leached metal ions by using suitable extactant.

 

List of Publications

A. Electrodeposition & Corrosion:

1.	A. P. Abbott, F. Qiu, M. R. Ali, H. Abood and K. S. Ryder, “Double layer, diluents and anode effects upon the electrodeposition of aluminium from chloroaluminate based ionic liquids”, J. Royal Society of Chemistry. (Accepted)
2.	M. R. Ali and A. P. Abbott, “Electrodeposition of Al-Mg alloys from acidic AlCl3-EMIC-MgCl2 room temperature ionic liquids”, J. Electroanal. Chem. (Accepted)
3.	M. R. Ali, C. M. Mustafa and M. Habib, “Effect of molybdate, nitrite and zinc ions on the corrosion inhibition of mild steel in aqueous chloride media containing cupric ion”. Proceedings of International Symposium on “Marine Corrosion and Control”, Institute of Oceanology, Chinese Academy of Science, Qindao, China, Paper No. 6, pp. 40-48, 14-16 June (2006).
4.	M. R. Ali, A. Nishikata and T Tsuru, “Electrodeposition of cobalt from cobalt chloride-N-(n-butyl)pyridinium chloride molten salt”, Ind. J. Chem. Tech., 12, 648-653 (2005).
5.	T. Tsuru, Y. Huang, M. R. Ali and A. Nishikata, “Hydrogen entry into steel during atmospheric corrosion process”, Corrosion Science, 47, 2431-2440 (2005).
6.	M. R. Ali, A. Nishikata and T Tsuru, “Electrodeposition of Al-Ti alloys from aluminum chloride-N-(n-butyl)pyridinium chloride room temperature molten salt”, Ind. J. Chem. Tech., 10, 14-20 (2003).
7.	M. R. Ali, A. Nishikata and T Tsuru, “Electrodeposition of cobalt-chromium alloys from cobalt chloride-N-(n-butyl)pyridinium chloride molten salt”, Ind. J. Chem. Tech., 8, 44-50 (2001).
8.	M. R. Ali, A. Nishikata and T Tsuru, “Electrodeposition of Al-Ni intermetallic compounds from aluminum chloride-N-(n-butyl)pyridinium chloride melt at room temperature”, J. Electroanal. Chem., 513, 1118-118 (2001).
9.	M. R. Ali, A. Nishikata and T Tsuru, “Electrodeposition of mechanism of aluminum from aluminum chloride-N-(n-butyl)pyridinium chloride room temperature molten salt”, Ind. J. Chem. Tech., 6, 317-324 (1999).
10.	M. R. Ali, A. Nishikata and T Tsuru, “Electrodeposition of aluminum-chromium alloys from ALCl3-BPC melt and its corrosion and high temperature oxidation behaviors”, Electrochimica Acta, 42 (15), 2347-2354 (1997).
11.	M. R. Ali, A. Nishikata and T Tsuru, “Electrodeposition of Co-Al alloys of different composition from the ALCl3-BPC-CoCl2 room temperature molten salt”, Electrochimica Acta, 42 (12), 1819-1828 (1997).

B. Extractive Metallurgy:

1.	R. K. Bisaws and M. R. Ali and N. Begum, “Extraction behaviour of Fe3+ from chloride solution by technical grade D2EHPA: A comparison with the results obtained by analytical grade”, Pak. J. Sci. Ind. Res., 50(1), 10-17 (2007).
2.	R. K. Bisaws, M R. Ali, A. K. Karmakar and M. Kamruzzaman, “Kinetics of solvent extraction of copper(II) by bis-(2,4,4-trimethylpentyl)phosphonic acid using single drop technique”, J. Chem. Eng. and Tech., 30(6), 774-781 (2007).
3.	M. A. Habib, R. K. Biswas, M. R. Ali and A. K. M. Hasan, “Leaching of non-treated ilmenite by HCl-CH3OH-H2O mixture and its kinetics”, Ind. J. Chem. Tech., 13, 53-59 (2005).
4.	M. N. Islam, M. M. Islam, A. Q. Sarker and M. R. Ali, “Thermodynamics and transport properties of aqueous solutions of 1,3-propanediol, cis-2-butene-1,4-diol and ethylenediamine”, J. Bang. Chem. Soc., 18 (1), 9-19 (2005).
5.	M. R. Ali, R. K. Biswas, M. A. Habib and D. K. Sarker, “Solvent extraction of Ti(IV) from aqueous solution by cyanex 301 dissolved in kerosene”, Rajshahi Univ. Stud., Part B, J. Sci., 31, 1-10 (2003).
6.	M. R. Ali, N. Begum, and S Ahmed, “Solvent extraction of vanadium(V) from aqueous sulfate solution by tri-n-octylamine in kerosene-decan-1-ol system”, Rajshahi Univ. Stud., Part B, J. Sci., 30, 61-72 (2002).
7.	M. A. Habib, M. R. Ali, M. Islam and M. E. Miah, “Solvent extraction of titanium(IV) from sulfate medium by DPP-TPP mixture in toluene”, J. Bang. Chem. Soc., 15 (2), 101-112 (2002).
8.	R. K. Biswas, M. A. Habib and M. R. Ali, “Intercalation of g-zirconium phosphate benzenephosphate by primary amines”, Ind. J. Chem. Tech., 7, 137-141 (2000).
9.	M. A. Habib. M. R. Ali, A. K. Azad and M. Y. A. Mullah, “Solvent extraction of Ti(IV) from sulfate solution with technical grade di-2-ethylhexyl phosphoric acid in kerosene”, Rajshahi Univ. Stud., (Part-B), 27, 61-71 (1999).
10.	R. K. Biswas, M. A. Habib, M. R. Ali and M. Z. Haque, “Kinetics of Mn2+ extraction in acidic chloride-D2EHPA-kerosene system using the constant interfacial area stirred cell technique”, Pak. J. Sci. Ind. Res., 41 (3) 121-127 (1998).
11.	R. K. Bisaws, D. A. Begum, M. R. Ali and S. Siraj-un-Noor, “Solvent extraction of vanadium(IV) and vanadium(V) with di-o-tolylhydrogenphosphate in benzene”, J. Chem. Soc. Pak., 12 (1), 41-47 (1990).
12.	R. K. Biswas and M. R. Ali, “Kinetics of backward extraction of titanium(IV)-di-o-tolylphospato complex from isobutanol-benzene solution by acidic sulfate solution”, Ind. J. Chem., 29A, 274-276 (1990).
13.	R. K. Bisaws and M R. Ali, “Kinetics of extraction of titanium(IV) from acidic sulfate solution by di-o-tolyl phosphate-isobutanol-benzene system”, Ind. J. Chem., 28A, 881-885 (1989).
14.	R. K. Bisaws and M. R. Ali, “Solvent Extraction of titanium(IV) from highly acidic sulfate solution by di-o-tolyl phosphoric acid-iso-butanol-benzene system”, The Rajshahi University Studies, (Part B) XV, 51-63 (1987).

Conferences Attended and Paper Presented in Abroad

1.	Participated and presented a paper entitled, “Effect of molybdate, nitrite and zinc ions on the corrosion inhibition of mild steel in aqueous chloride media containing cupric ion” in “The Third International Symposium on Marine Corrosion and Control”. Organised by Institute of Oceanology, Chinese Academy of Science, Qindao, China, 14-16 June (2006).
2.	Participated and presented a paper entitled, “Extraction Behaviour of Fe3+ from Chloride Solutions by Technical Grade D2EHPA: A Comparison with the Results Obtained by Analytical Grade” in “International Conference on Emerging Trends in Mineral Processing and Extractive Metallurgy”. Organized by Regional Research Laboratory (CSIR), Bhubaneswar, Orissa, India, 13-14 June (2005).
3.	Participated and presented a paper entitled, “Electrodeposion of cobalt from cobalt chloride-N-(n-butyl) pyridinium chloride molten salt” in “International Seminar on Non-Ferrous Metals and Materials with Satellite Symposium on Aluminium”. Organized by National Metallurgical Laboratory, Jamshedpur, India, 9-11 February (2000).
4.	Participated and presented a paper entitled, “Electrodeposion of Aluminum-Chromium Alloys from Non-aqueous Solutions and its Corrosion Behavior in Aqueous Solutions” in “Bi-Annual Conference of The Electrochemical Society of Japan”, Tokyo, Japan, 3-4 April (1996).
5.	Participated and presented a paper entitled, “Electrodeposion of Cobalt-Chromium Alloys from Non-aqueous Solutions” in “International Symposium on Advanced Materials and Technology for the 21st Century”. Organized by Honolulu, Hawaii, 13-15 December, (1995).
6.	Participated and presented a paper entitled, “Electrodeposion of Al-Co alloys of different composition from non-aqueous solutions” in “Bi-Annual Conference of The Electrochemical Society of Japan”, Tokyo, Japan, 3-4 April (1995).
7.	Participated and presented a paper entitled, “Electrodeposion of Al-base Ti Intermetallic Compounds from Non-aqueous Solutions” in “Bi-Annual Conference of The Electrochemical Society of Japan”, Tokyo, Japan, 19-20 September (1994).
8.	Participated and presented a paper entitled, “Electrodeposion of Ni-Al intermetallic compound in non-aqueous medium” in “Bi-Annual Conference of The Electrochemical Society of Japan”, Kyoto, Japan, 14-15 October (1993).
9.	Participated and presented a paper entitled, “Composition control of alloy deposition by superposed pulse current” in “Bi-Annual Conference of The Electrochemical Society of Japan”, Tokyo, Japan, 29-30 September (1995).
10.	Participated and presented a paper entitled, “Electrodeposion of Al-Ni intermetallic compounds from non-aqueous medium” in “Annual Conference of The Surface Finishing Society of Japan”, Tohoku, Japan, 14-15 October (1992).